Hi,
just downloaded the iso (both the mate and xfce), tried to install on nvme partition alone side with windows.
I notice that in the mate iso, when I click custom/manual partition installation button, it locks up for about 40 seconds , both keyboard and mouse lost response. But it continues eventually.
Installation completed and booted into the de fast.
However within the de it locks up randomly like a few mintues a time. Both the mate edition and the xfce edition.
Some lock ups it seems its only the keyboard/mouse being dead, the system is still going on because the new update is avaialble pops up.
One time it backs to life after like more than 1 minute, other locks I waited like 3 mintues and have to press the reboot button.
I wonder what could be wrong here, could be hardware support? My hardware is many years old should be mature support anyway.
In windows 10, also archlinux, I do not have any issues for a year.
Here's some of the hardware:Things to consider:
I did enable Ryzen's PBO auto overclock in BIOS, but it is completely fine in windows and linux.
The USB3.0 Dock hub should not be the problem, because I have a second mouse connected directly to the motherboard, when lock up happens, both mouse lost response, keyboard completely dead no cap on off.
Memory is running in XMP profile, but is in single channel mode, only in memory channel A, not memory channel B, because my ryzen cpu lost some pins in channel B so it can no longer run anything in channel B or dual channel setup. However this is fine in both windows and linux.
![Image]()
![Image]()
![Image]()
![Image]()
Is there anything I can look into to troubleshooting?
just downloaded the iso (both the mate and xfce), tried to install on nvme partition alone side with windows.
I notice that in the mate iso, when I click custom/manual partition installation button, it locks up for about 40 seconds , both keyboard and mouse lost response. But it continues eventually.
Installation completed and booted into the de fast.
However within the de it locks up randomly like a few mintues a time. Both the mate edition and the xfce edition.
Some lock ups it seems its only the keyboard/mouse being dead, the system is still going on because the new update is avaialble pops up.
One time it backs to life after like more than 1 minute, other locks I waited like 3 mintues and have to press the reboot button.
I wonder what could be wrong here, could be hardware support? My hardware is many years old should be mature support anyway.
In windows 10, also archlinux, I do not have any issues for a year.
Here's some of the hardware:
Code:
System: Host: b450aoruspro Kernel: 6.11.2-zen3-xanmod1-1-bore arch: x86_64 bits: 64 Desktop: Xfce v: 4.18.1 Distro: Artix LinuxMachine: Type: Desktop System: Gigabyte product: B450 AORUS PRO v: N/A serial: N/A Mobo: Gigabyte model: B450 AORUS PRO-CF serial: N/A UEFI: American Megatrends LLC. v: F66b date: 07/11/2024CPU: Info: 8-core AMD Ryzen 7 5800X [MCP] speed (MHz): avg: 3610 min/max: 550/4851Graphics: Device-1: Advanced Micro Devices [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] driver: amdgpu v: kernel Device-2: DisplayLink USB3.0 Dual Video Dock driver: cdc_ncm,snd-usb-audio type: USB Display: x11 server: X.org v: 1.21.1.13 driver: X: loaded: amdgpu unloaded: modesetting failed: fbdev,vesa dri: radeonsi gpu: amdgpu resolution: <missing: xdpyinfo/xrandr> resolution: 3840x2160 API: OpenGL Message: Unable to show GL data. glxinfo is missing.Network: Device-1: Intel I211 Gigabit Network driver: igbDrives: Local Storage: total: 476.95 GiB used: 23.12 GiB (4.8%)Info: Memory: total: 16 GiB available: 15.54 GiB used: 2.54 GiB (16.4%) Processes: 281 Uptime: 20m Shell: Sudo pinxi: 3.3.36-4I did enable Ryzen's PBO auto overclock in BIOS, but it is completely fine in windows and linux.
The USB3.0 Dock hub should not be the problem, because I have a second mouse connected directly to the motherboard, when lock up happens, both mouse lost response, keyboard completely dead no cap on off.
Memory is running in XMP profile, but is in single channel mode, only in memory channel A, not memory channel B, because my ryzen cpu lost some pins in channel B so it can no longer run anything in channel B or dual channel setup. However this is fine in both windows and linux.
Is there anything I can look into to troubleshooting?
Statistics: Posted by notetoshow — Fri Oct 11, 2024 1:45 pm